Manufacturing Process Of Matches
Oct 26, 2022
Wood stem match manufacturing can be generally divided into five parts: stem manufacturing, stem processing, match tip manufacturing, box manufacturing, packaging and phosphorus brushing.
① Stem manufacturing: The wood with loose texture, straight texture, inflammables and no odor shall be used for making match stems. The commonly used tree species are Populaceae or Tiliaceae, and pine or spruce can also be used. Pine wood needs to be cooked to remove the rosin.
After material selection, the raw wood is sawed into segments, the bark is peeled, and the continuous stem pieces with uniform thickness are peeled. The stem slices are then divided into branches of certain specifications.
② Stems treatment: the stems are soaked with phosphoric acid or ammonium phosphate solution with a concentration of about 1%, which is called anti burning treatment to prevent the embers from falling after the match burning. After draining to remove the surface moisture, it is sent to the stem dryer for drying to reduce the stem moisture content to 6-8%. After the stem is dried, it is screened by the stem selecting machine to remove the broken branches, long strips and wide pieces, and select the stem that meets the specifications.
③ Match tip manufacturing: the qualified stems are sent to the match automatic continuous machine through the wind pipe or conveyor belt, and the multiple processes, such as stem cutting, stem loading, wax dipping, medicine dipping, drying and stem unloading, are automatically carried out to complete the match manufacturing.
④ Match box manufacturing: Match boxes are divided into paper boxes and wooden boxes. The paper box is made of roll paper or flat paper with a thickness of 0.4mm and a fixed weight of 300g/m2. The paper separator cuts the original web board into different widths to meet the production needs of the outer box or inner box. After the inner and outer boxes are made respectively, the boxes are sheathed to form a whole. The wooden box shall be made of wood sections with good materials and no knots. The inner or outer box sheets with scratches shall be spun out on the rotary box sheet machine, and then cut into box strips respectively. After being pasted by the box pasting machine, the box shall be covered and labeled after drying.
⑤ Packaging and phosphor brushing: matches and match boxes meet in the packaging process. The cartoning machine neatly loads matches into the box according to the specified number of sticks, and then the phosphor brushing machine brushes phosphorous paste on the side of the box. Another kind of phosphorus surface is printed on the side of the box sheet when the trademark is printed, which is called "printing phosphorus surface". The main components of phosphorus slurry are red phosphorus and adhesive. The traditional adhesive is leather adhesive, and synthetic adhesive is also used. After drying, the enveloping machine will seal every 10 boxes of matches into small packages and put them into boxes (100 small boxes, called "pieces"; 200 large boxes, called "double pieces"), that is, finished products.







