How to play a greater role of LED light source in lighting field
Oct 26, 2022
The luminous efficiency, or energy efficiency, of semiconductor lighting is an important indicator of energy-saving effect. At present, the light efficiency industrialization level of LED devices can reach 120~140lm/W, and the total energy efficiency of lighting lamps can be greater than 100lm/W. This is still not high, and the energy-saving effect is not obvious, which is far from the theoretical value of semiconductor device luminous efficiency of 250lm/W. To really achieve high luminous efficiency, we need to solve relevant technical problems from all aspects of the industrial chain, mainly to improve the internal quantum efficiency, external quantum efficiency, packaging light efficiency and lamp efficiency. This paper will discuss the technical problems to be solved in the extension, chip, packaging, lamp and other aspects.
1. Improve internal quantum efficiency and external quantum efficiency
The following measures are mainly taken to improve the internal quantum efficiency and external quantum efficiency.
(1) Substrate surface roughening and non-polar substrate
GaN is grown on nanoscale patterned substrate, "oriented" patterned substrate or non-polar and semi polar substrate to reduce dislocation and defect density and polar field influence, and improve internal quantum efficiency [1].
(2) Generalized homogeneous substrate
GaN is grown on Al2O3 sapphire substrate by HVPE (hydride liquid phase epitaxy) as a mixed homogenous substrate GaN/Al2O3. On this basis, GaN is epitaxial grown, which can greatly reduce the low dislocation density to 106 ~ 107cm-2 and greatly improve the internal quantum efficiency. Riya, Cree and Peking University are all in the process of research and development [2].
(3) Improved quantum well structure
Control the change mode and amount of In component, optimize the quantum well structure, improve the overlap probability of electrons and holes, increase the radiation recombination probability, and adjust the transport of non-equilibrium carriers, so as to improve the internal quantum efficiency.
(4) Chip with new structure
The new structure requires six sides of the chip to emit light, and new technologies are used on the chip interface to conduct various surface roughening methods, reduce the reflection probability of photons on the chip interface, and increase the surface transmittance to improve the external quantum efficiency of the chip.
2. Improve the light output efficiency of the package and reduce the junction temperature
(1) Efficiency and coating technology of phosphor
The light excitation efficiency of phosphor is not high at present, the yellow powder can reach about 70%, and the efficiency of red powder and green powder is low, which needs to be further improved. In addition, the coating process of phosphor is very important. It is reported that the excitation efficiency is high when the 60 μ m phosphor is uniformly coated on the chip surface.
(2) COB packaging
At present, the light source of semiconductor lighting adopts various forms of COB packaging. It is urgent to improve the luminous efficiency of COB packaging. It is reported that the second generation (some called the third generation) COB matrix structure packaging can achieve a luminous efficiency of more than 120lm/W. If the flip chip and hexahedron are used for total reflection, the light effect can reach more than 160lm/W.
(3) Reduce junction temperature
When the junction temperature is 25 ℃, the luminous amount is set as 100%. When the junction temperature rises to 60 ℃, the luminous amount is only 90%, and when it rises to 140 ℃, the luminous amount is only 70%. Therefore, heat dissipation measures should be increased during packaging to maintain a lower junction temperature and a higher luminous efficiency.
3. Improve the light taking efficiency of lamps
The efficiency of different LED lamps varies greatly. Generally, the efficiency of LED lamps is more than 80%, and some of them can be more than 90%. According to the characteristics of LED light source and different application occasions, the secondary optical design of lamps should be refined, and the heat dissipation and glare of lamps should also be considered to improve the light extraction efficiency of LED lamps.







